Marantz AV8805A AV vs Bluesound Node
Quick Verdict
The Marantz AV8805A and the Bluesound Node are different kinds of components built for different stages of a system, so this is less a head-to-head and more a question of what a buyer already owns. The AV8805A is a 13.2 channel pre-amplifier and processor that needs separate power amplifiers for every channel, confirmed in the listing, while the Node is a two-channel hi-res streaming source with its own preamp and headphone amp stage built in. Buyers assembling a separates-based, up to 9.2.4 channel home theater system around Audyssey calibration should choose the AV8805A. Buyers who already own an amplifier or powered speakers and want a well-documented streaming source with Dirac Live room correction should choose the Bluesound Node.
| Spec | Marantz AV8805A AV | Bluesound Node |
|---|---|---|
| Drive type | Not published in listing | N/A |
| Cartridge | Not published in listing | N/A |
| Platter | Not published in listing | N/A |
| Tonearm | Not published in listing | N/A |
| Speeds | Not published in listing | N/A |
| Built-in preamp | Not specified; listing mentions connecting a turntable but does not confirm a phono preamp | N/A |
| Bluetooth and USB | Bluetooth and USB (listing mentions wireless streaming and USB input) | N/A |
| Outputs | 3 HDMI outputs, subwoofer and speaker outputs (listing mentions connecting subwoofer and speakers) | N/A |
| Dimensions and weight | Not published in listing | Not published in listing. No size or weight figures appear in the feature bullets. |
| Included accessories | Not published in listing | Not published in listing. The feature bullets describe internal components and streaming features rather than box contents. |
| Type | 13.2 channel AV pre-amplifier and processor, no internal power amplification | Hi-res network audio streamer functioning as a source component, pre-amplifier, headphone amplifier, and digital to analog bridge, confirmed directly in the feature bullets. |
| Power output | Not published in listing. As a pre-amplifier and processor, this model has no internal power amp stage and relies on separate power amplifiers for every channel | Not published in listing. The Node is described as a pre-amplifier and headphone amplifier rather than a power amplifier meant to drive passive speakers directly. |
| Channels | 13.2 channel processing, supporting speaker layouts up to 7.2.6 or 9.2.4 | Not applicable in the usual multichannel sense. The Node is a two-channel source and preamp component rather than a multichannel power amplifier. |
| Inputs and outputs | 8 HDMI inputs and 3 HDMI outputs, plus a dedicated 8K HDMI input, along with turntable, subwoofer, speaker and disc player connections and USB | HDMI eARC and an analog and digital combo input with auto-sensing are confirmed, along with a subwoofer output that includes bass management options. |
| HDMI and video | Advanced 8K HDMI upscaling, with support for HLG, Dynamic HDR, HDR10, HDR10 plus, QFT, QMS, VRR and ALLM | HDMI eARC is confirmed for television sound. No video pass-through or video processing is described, consistent with an audio-only streaming component. |
| Wireless and streaming | Wi-Fi, Bluetooth, AirPlay 2 and built in HEOS multi-room streaming, with Spotify, TuneIn, Deezer, TIDAL and other major services | Tidal, Qobuz, Deezer, and Spotify streaming are confirmed, along with internet radio, at up to 24-bit and 192kHz hi-res quality through the BluOS platform. |
| Phono input | A turntable connection is listed. Whether this is a dedicated phono preamp stage or a line level input is not specified | Not published in listing. No phono input is mentioned anywhere in the feature bullets. |
| Remote and app | Voice control integration is listed through Google Assistant, Apple Siri and Josh.ai smart home platforms. A specific remote model is not named | The BluOS controller app is confirmed, along with an IR remote using learning functionality for traditional remote based control. |
Power and Sound Quality
The Marantz AV8805A scored 26 out of 30 for power and sound quality, though the listing is explicit that this is a 13.2 channel pre-amplifier and processor with no internal power amp stage. Every channel needs an external amplifier, so the published score reflects processing and calibration quality rather than raw wattage, since no wattage figure applies to this unit at all.
The Bluesound Node scored 24 out of 30 for the same category, built around a named ESS ES9039Q2M SABRE DAC and a quad-core 1.8GHz processor confirmed directly in the feature bullets. Like the Marantz, the Node is described as a pre-amplifier and headphone amplifier rather than a power amplifier meant to drive passive speakers directly, so its score also reflects signal quality rather than output wattage.
Both components sidestep the usual wattage comparison for the same underlying reason: neither one is built to push current into passive speakers on its own. The Marantz's two-point edge in the breakdown reflects its 13.2 channel scope and Audyssey MultEQ XT32 calibration, while the Node's score reflects a named DAC chip and processor that many competing streamers describe only in vague terms.
Connectivity and Inputs
Connectivity is where the AV8805A separates itself clearly, with 8 HDMI inputs, 3 HDMI outputs and a dedicated 8K HDMI input confirmed in the listing, alongside turntable, subwoofer, speaker and disc player connections and USB. The listing does not specify whether the turntable connection is a true phono preamp stage or a line level input, which is a real gap for vinyl-focused buyers.
The Bluesound Node's connectivity is narrower by design, confirming HDMI eARC for television sound plus an analog and digital combo input with auto-sensing, along with a subwoofer output that includes bass management options. No phono input is mentioned anywhere in the feature bullets, so a turntable needs a separate external phono preamp regardless of which component a buyer chooses.
Connectivity scored 23 out of 25 for the Marantz against 22 out of 25 for the Node, a gap that lines up directly with the AV8805A's eight HDMI inputs against the Node's single eARC connection and one combo input. Buyers wiring up a full home theater with multiple HDMI sources will notice this difference immediately; buyers connecting one television and one analog source will not.
Formats, Processing and Room Correction
The AV8805A supports 13.2 channel processing up to 7.2.6 or 9.2.4 speaker layouts, with advanced 8K HDMI upscaling and support for HLG, Dynamic HDR, HDR10, HDR10 plus, QFT, QMS, VRR and ALLM. Audyssey MultEQ XT32 with Dynamic EQ and LFC handles room correction, a named and well-regarded calibration system confirmed directly in the listing.
The Bluesound Node uses Dirac Live for room correction, which the listing describes as a genuine, independently developed calibration system, separate from the DAC and processor already named. Streaming formats cover Tidal, Qobuz, Deezer and Spotify at up to 24-bit and 192kHz hi-res quality through the BluOS platform, with DSD playback listed only as coming soon rather than available now.
Scored on this line, the Marantz earned 14 out of 15 against the Node's 13 out of 15, a narrow gap that reflects the AV8805A's broader video format list stacked next to the Node's narrower but still genuine room correction and hi-res streaming formats. Neither processing path overlaps much with the other, since one is built around video and multichannel audio while the other is built around two-channel hi-res sound.
Features, Streaming and Apps
Wi-Fi, Bluetooth, AirPlay 2 and built-in HEOS multi-room streaming are all confirmed for the AV8805A, with Spotify, TuneIn, Deezer, TIDAL and other major services supported. Voice control integration through Google Assistant, Apple Siri and Josh.ai smart home platforms is listed as well, though no specific remote model is named anywhere in the listing.
The Bluesound Node runs on the BluOS controller app, confirmed in the listing, with BluOS multi-room grouping and independent zones supported from a single app. An IR remote using learning functionality is also confirmed, giving traditional remote-based control alongside the app, something not explicitly described for the Marantz.
Build, Design and Controls
Dimensions, weight and included accessories are not published for the AV8805A, and the listing does not state whether the front panel display or control layout differs from earlier Marantz processors. The build and design score of 8 out of 10 reflects a flagship chassis without the specific measurements a buyer would want before fitting it into a rack or cabinet.
The Bluesound Node also leaves dimensions and weight unpublished, scoring the same 8 out of 10 for build and design. Its described physical controls lean on the IR remote and BluOS app rather than extensive front panel buttons, consistent with a streaming source built to be tucked away rather than operated by hand.
Setup and Daily Use
Setting up the AV8805A assumes a separates-based system already in place, since the processor has no internal amplification and depends on external power amps wired to each of its up to 13.2 channels. Daily use benefits from Audyssey calibration and multiple voice assistant integrations, but the listing's silence on a named remote model leaves one practical daily detail unconfirmed.
The Bluesound Node sets up faster for a simpler use case: connect it to an existing amplifier or powered speakers, then control everything from the BluOS app or the included IR remote. Daily use centers on streaming Tidal, Qobuz, Deezer and Spotify at hi-res quality, with Dirac Live calibration run once and left in place.
Day-to-day reliability for the AV8805A depends on an external amp chain behaving correctly alongside the processor, which adds more components that could need troubleshooting. The Node's simpler single-box role between source and existing amplifier means fewer links in the daily signal chain, even though it cannot replace the amplifier itself.
Who Should Buy It
The listing's best_for guidance names home theater enthusiasts building a separates based 13.2 channel system who want extensive HDMI and HDR support plus Audyssey calibration in the processor. The avoid_if guidance is direct: skip the AV8805A if you want a single box with its own amplification, since it strictly requires external power amps.
The Node's best_for guidance targets buyers who already own an amplifier or powered speakers and want a well-documented hi-res streaming source with Dirac Live room correction built in. Its avoid_if guidance warns against expecting an all-in-one streaming amplifier that can drive passive speakers directly without a separate amp.
Framed side by side, the two best_for statements describe almost entirely different buyers. One assumes a dedicated home theater room with external amplification already planned, and the other assumes an amplifier or powered speakers already sitting in the room, waiting for a better source. Reading both avoid_if lines together makes the split even clearer, since each one rules out exactly the use case the other model is built for.
The Deciding Question
The deciding question is not which component sounds better in isolation, since both are confirmed as pre-amplifier style devices without their own speaker-driving power stage, but what role each needs to fill in an existing system. The AV8805A is the brain of a full, separates-based home theater with up to 9.2.4 channels; the Node is a hi-res source feeding into whatever amplification a buyer already owns.
A second factor is channel count versus simplicity. Thirteen point two channels of processing, eight HDMI inputs and Audyssey MultEQ XT32 only make sense for a buyer actually building a multichannel theater, while the Node's two-channel focus, named DAC and Dirac Live suit a buyer who wants one well-specified streaming box rather than a full surround rebuild.
Who Should Buy Which
Buy the Marantz AV8805A AV if the project is a dedicated, separates-based home theater system with up to 9.2.4 channels, multiple HDMI sources, and a need for Audyssey MultEQ XT32 room correction built into the processor. It is the stronger pick for buyers who already own or plan to buy external power amplifiers for every channel.
Buy the Bluesound Node if the goal is a well-documented, two-channel hi-res streaming source that plugs into an existing amplifier or powered speakers. Its named ESS DAC, quad-core processor, Dirac Live room correction and BluOS multi-room support make it the better pick for a simpler, source-focused upgrade rather than a full multichannel build.
Marantz AV8805A AV
Pros
- 13.2 channel pre-amplifier and processor with support for up to 9.2.4 speaker layouts
- 8 HDMI inputs, 3 outputs and a dedicated 8K HDMI input
- Broad HDR format support including HDR10 plus and Dynamic HDR
- Wi-Fi, Bluetooth, AirPlay 2 and built in HEOS multi-room streaming
- Audyssey MultEQ XT32 with Dynamic EQ and LFC for room calibration
- Multiple voice assistant integrations for hands free control
Cons
- No internal power amplification, so separate amplifiers are required
- Power output is not applicable and therefore not published
- Dimensions, weight and included accessories are not stated
- Whether the turntable connection is a true phono stage is not confirmed
- No specific remote model is named in the listing
Bluesound Node
Pros
- ESS ES9039Q2M SABRE DAC and a quad-core 1.8GHz processor are both confirmed by name
- Dirac Live room correction is a genuine, independently developed calibration system
- Tidal, Qobuz, Deezer, and Spotify streaming at up to 24-bit 192kHz are all confirmed
- BluOS multi-room grouping and independent zones are supported from a single app
- HDMI eARC and an auto-sensing combo input simplify connecting a TV or analog source
Cons
- No power amplifier wattage applies since this is a pre-amplifier and streaming source, not a speaker-driving amplifier
- No phono input is confirmed, so a turntable needs a separate external phono preamp
- DSD playback is described only as coming soon via a future update, not available now
- No dimensions or weight figures are given anywhere in the feature bullets
Who Should Buy Each
Marantz AV8805A AV
- Separates based home theater builders who need a flagship 13.2 channel processor
- Buyers who want extensive 8K and HDR pass-through across many HDMI sources
- HEOS and AirPlay 2 households who want streaming built into the processor
- Owners who value Audyssey MultEQ XT32 room calibration included as standard
Bluesound Node
- Buyers who want a confirmed, named DAC and processor rather than vague digital audio claims
- Households planning a BluOS multi-room system across several rooms or zones
- Listeners who want Dirac Live room correction paired with hi-res streaming services
- Anyone who wants HDMI eARC television sound routed through a dedicated streaming preamp
Quick Decision Guide
| If you are building a separates-based home theater with up to 9.2.4 channels | Choose Marantz AV8805A AV |
| If you already own an amplifier or powered speakers and just need a streaming source | Choose Bluesound Node |
| If you need eight HDMI inputs and a dedicated 8K HDMI input | Choose Marantz AV8805A AV |
| If you want Dirac Live room correction built into a compact streaming component | Choose Bluesound Node |
| If you want Audyssey MultEQ XT32 with Dynamic EQ and LFC for a multichannel room | Choose Marantz AV8805A AV |
FAQ
About This Comparison
Mandrillis Team
The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.
Read our full research methodology.
We may earn a commission at no extra cost to you.