MANDRILLIS Better Gear. Better Sound.

Wharfedale Super Linton vs Marshall Acton IV

Quick Verdict

The Wharfedale Super Linton is a premium passive speaker that scores 86 overall, built around a wide 39Hz to 20kHz response, a high 90dB sensitivity, and a broad 25 to 200 watt recommended amplifier range, all finished in a classic Walnut cabinet. The Marshall Acton IV is a powered Bluetooth tabletop speaker scoring 83, with wired RCA and 3.5mm inputs, Spotify Tap through a customizable M-button, and tactile bass and treble controls under a brass top panel. Choose the Super Linton if you already own an amplifier and want passive speaker heritage with strong published sensitivity figures. Choose the Acton IV if you want an all in one powered speaker with wireless streaming and wired turntable compatibility in a single, stylish box that needs no separate amp.

Spec Wharfedale Super Linton Marshall Acton IV
Type Not published in listing Powered Bluetooth home speaker
Drivers Not published in listing Not published in listing; listing mentions improved tweeters and waveguides and a redesigned bass port
Power or sensitivity Sensitivity 90dB (2.8V @ 1m), nominal impedance 6 ohms (8 ohm compatible), recommended amp power 25 to 200W Not published in listing
Frequency response 39Hz to 20kHz (+/-3dB) Not published in listing
Inputs and connectivity Not published in listing RCA stereo input, 3.5mm auxiliary input, Bluetooth
Bluetooth and streaming Not published in listing Bluetooth, Spotify Tap via the customizable M-button
Dimensions Not published in listing Not published in listing
Weight Not published in listing Not published in listing
Finish Walnut, other finishes available Black with brass top panel controls
Included accessories Not published in listing Not published in listing

Sound Quality

The Wharfedale Super Linton scores 28 out of 30 for sound quality, the higher of the two, and the listing backs that up with a published frequency response of 39Hz to 20kHz within plus or minus 3dB, a genuinely wide bandwidth for a passive speaker. Its 90dB sensitivity rating means it should produce loud, clean output from a comparatively modest amplifier, which is a meaningful advantage for anyone pairing it with a vintage or lower powered receiver. That wide bandwidth, combined with the high sensitivity figure, is the main reason the listing's own verdict describes it as delivering satisfying low frequency reach for most music.

The Marshall Acton IV scores 27 out of 30, just behind, with the listing pointing to improved tweeters and waveguides for a wider soundstage and a redesigned bass port said to deliver a cleaner and more powerful low end. However, the Acton IV's listing does not publish driver sizes, wattage, or a frequency response figure, so its sound quality claims rest on descriptive language rather than the hard numbers the Super Linton provides. A dynamic loudness feature is also referenced in the listing, suggesting the Acton IV adjusts its tonal balance automatically at different volume levels rather than relying on a fixed response curve.

Drivers, Power and Room Fit

The Super Linton's driver types and sizes are not published in the listing, which is a real gap given how driver configuration shapes a passive speaker's character. What is published is a 6 ohm nominal impedance, compatible with 8 ohm amplifiers, and a recommended amplifier power range from 25 to 200 watts, giving owners wide latitude in matching components. That broad range means the Super Linton can work with anything from a modest stereo receiver to a much larger amplifier, as long as the chosen unit falls inside the stated wattage window.

The Acton IV's drivers are also undocumented beyond the mention of improved tweeters, waveguides, and a redesigned bass port, and no wattage or power handling figure appears in the listing either. Because the Acton IV is a self contained powered speaker, room fit depends more on placement near power and source equipment than on amplifier matching, which is the main planning consideration the Super Linton requires that the Acton IV does not. For a single desk or small room, that self contained design removes one variable buyers of the Super Linton must still work out on their own.

Features and Connectivity

Features and connectivity favor the Acton IV, which scores 16 out of 20 against the Super Linton's 13 out of 20. The Acton IV's listing names RCA stereo input, a 3.5mm auxiliary input, and Bluetooth, plus Spotify Tap accessed through a customizable M-button, giving it a concrete set of wired and wireless connection options out of the box. That M-button is described as customizable, so an owner can assign it to a preferred streaming shortcut rather than being locked into a single function.

The Super Linton's listing does not publish any connectivity details at all, consistent with it being a passive design that relies entirely on an external amplifier or receiver for signal and streaming. Buyers who want built in wireless playback will find the Acton IV's documented Bluetooth and Spotify Tap meaningfully easier to act on than the Super Linton's unstated connection options. Anyone considering the Super Linton for a modern, wireless-first setup should plan on pairing it with a receiver or streaming amplifier that supplies those features separately.

Build, Design and Finish

The Super Linton scores 14 out of 15 for build and design and comes in a classic Walnut finish, with other finishes mentioned as available, giving it a traditional look suited to a dedicated listening room or hi-fi cabinet. The Acton IV scores 13 out of 15 and pairs a black cabinet with brass top panel controls for a style that reads as more of a tabletop lifestyle piece than a hi-fi component. The Super Linton's Walnut cabinet also signals the brand's long running heritage line, which tends to favor understated wood veneers over bold colors.

Neither listing publishes dimensions or weight, so direct physical comparison is not possible from the given data. The design intent of each is clear from its described finish, though: the Super Linton aims at a classic stereo speaker aesthetic, while the Acton IV leans into Marshall's recognizable amp-inspired look with its brass controls. Buyers choosing between the two are effectively choosing between a traditional bookshelf or floorstanding look and a retro amplifier styled tabletop unit.

Setup and Placement

Ease of setup scores are identical at 8 out of 10 for both. The Super Linton, as a passive speaker, needs a separate amplifier or receiver and speaker cable runs, and with no dimensions published, planning exact placement on a stand or shelf requires confirming size separately. A pair of Super Lintons also needs careful spacing from the listener and from room walls to make the most of that wide published frequency response.

The Acton IV is a self contained powered unit, so setup is mainly a matter of placing it near a power outlet and, if using wired sources, running an RCA or 3.5mm cable to it. Its listing also omits dimensions, but because it does not require external amplification, the practical setup burden is generally lighter than the Super Linton's two-box passive arrangement. A single Acton IV can simply sit on a shelf or desk and begin streaming over Bluetooth within minutes of unboxing.

Daily Use

Day to day, the Super Linton's high 90dB sensitivity and wide 25 to 200 watt amplifier range mean it should perform consistently across different volume levels and with a range of paired equipment, assuming the owner already has a receiver or amplifier in place. There is no mention of any on-unit control, since all adjustment happens through the connected amplifier, so daily volume and tone changes depend entirely on that separate component.

The Acton IV offers tactile bass and treble controls directly on its top panel along with a customizable M-button for Spotify Tap, letting an owner adjust tone and trigger playback without reaching for a phone or separate remote. For daily convenience in a single room without an existing hi-fi setup, the Acton IV's built in controls and wireless streaming make it the simpler speaker to live with. The auto on and standby type behavior typical of this category also means less fiddling with power switches during ordinary use.

Who Should Buy It

According to its own best for note, the Super Linton suits buyers seeking a premium passive speaker with wide bandwidth, high sensitivity, and a classic Walnut finish. It should be avoided by anyone who needs built in amplification, wireless streaming, or complete physical dimensions confirmed before purchase, since none of those are part of this listing. That tradeoff of missing documentation for strong published audio figures sums up the Super Linton's whole proposition.

The Acton IV's own best for note points to listeners who want a stylish powered tabletop speaker with analog controls and wired turntable compatibility. It is not the right choice for anyone who needs a battery powered portable speaker or wants detailed published specifications such as driver sizes and wattage before buying. Those priorities make it a better match for a single room setup than for a dedicated two speaker stereo listening space.

The Deciding Question

The real question between the Wharfedale Super Linton and the Marshall Acton IV is whether you already have, or want to build, a separate amplifier based system, or whether you want one box that plugs in and plays. The Super Linton's published 90dB sensitivity, wide 39Hz to 20kHz response, and broad 25 to 200 watt amplifier compatibility make it the stronger choice for someone assembling a traditional stereo setup around existing or future components. It also carries the higher overall score of the two, at 86 against 83, largely on the strength of those published audio figures.

The Marshall Acton IV answers the opposite need, offering Bluetooth, wired RCA and 3.5mm inputs, Spotify Tap, and physical bass and treble dials all inside one powered cabinet with no amplifier required. If convenience and wireless streaming matter more than passive speaker heritage and sensitivity numbers, the Acton IV is the more practical pick. It also suits anyone who does not want to shop for or maintain a separate amplifier at all.

Who Should Buy Which

Choose the Wharfedale Super Linton if you already own or plan to buy a separate amplifier, you want the higher published sound quality score, and you value a classic Walnut finish with documented sensitivity and impedance figures over built in streaming features.

Choose the Marshall Acton IV if you want a single powered speaker with Bluetooth, Spotify Tap, wired turntable inputs, and on-unit bass and treble controls, and you are comfortable with a listing that does not publish driver sizes, wattage, or a frequency response figure.

Wharfedale Super Linton

Pros

  • Wide 39Hz to 20kHz published frequency response
  • High 90dB sensitivity for easy amplifier matching
  • Broad recommended amplifier range from 25 to 200 watts
  • 6 ohm nominal impedance with 8 ohm compatibility
  • Classic Walnut finish with other finishes available

Cons

  • Driver types and sizes are not published
  • Dimensions and weight are not published
  • No connectivity or input details in the listing
  • Included accessories are not specified
  • Passive design requires a separate amplifier and source

Marshall Acton IV

Pros

  • Classic Marshall design with brass controls
  • Improved tweeters and waveguides for a wider soundstage
  • Redesigned bass port claims cleaner and more powerful low end
  • Tactile bass and treble controls on the top panel
  • Wired RCA and 3.5mm aux inputs for turntable use
  • Customizable M-button with Spotify Tap

Cons

  • No published driver sizes, wattage, or frequency response
  • No battery power so not portable
  • No mention of Wi-Fi or multiroom streaming
  • No exact dimensions or weight for placement planning

Who Should Buy Each

Wharfedale Super Linton

  • Listeners who already own a stereo amplifier or receiver
  • Buyers who value high sensitivity and flexible amplifier matching
  • Those wanting a premium speaker with broad frequency range
  • People who prioritize a classic real wood veneer look

Marshall Acton IV

  • Home office or bedroom listeners who want a compact stereo speaker
  • Turntable owners who need RCA and 3.5mm aux inputs
  • Spotify users who want quick access through the M-button
  • Buyers who value tactile physical controls over app-only settings

Quick Decision Guide

If you already own a separate amplifier or receiver Choose Wharfedale Super Linton
If you want built in Bluetooth and Spotify Tap with no extra amplifier needed Choose Marshall Acton IV
If you want the higher published sound quality score and a wide documented frequency response Choose Wharfedale Super Linton
If you want wired RCA and 3.5mm turntable inputs plus tactile tone controls on the unit itself Choose Marshall Acton IV
If you value a classic Walnut hi-fi cabinet over a tabletop lifestyle design Choose Wharfedale Super Linton

FAQ

No. The listing describes it as a passive speaker with a recommended amplifier power range of 25 to 200 watts and a 6 ohm nominal impedance, meaning it requires a separate amplifier or receiver to operate.
No. The Acton IV is a powered Bluetooth speaker, so it does not need an external amplifier. It connects through Bluetooth, RCA, or a 3.5mm input and plays directly from its own built in amplification.
The Wharfedale Super Linton publishes a 39Hz to 20kHz response within plus or minus 3dB. The Marshall Acton IV listing does not publish a frequency response figure, so a direct numeric comparison is not possible.
Yes. The listing lists an RCA stereo input and a 3.5mm auxiliary input, both suited to wired turntable or other analog source connections, alongside its Bluetooth wireless option.
No. The listing does not mention any battery option, and as a passive speaker it has no internal power source at all, relying entirely on a connected amplifier for sound.
Wharfedale Super Linton last verified: October 2026 Marshall Acton IV last verified: October 2026

About This Comparison

M

Mandrillis Team

The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.

Read our full research methodology.

We may earn a commission at no extra cost to you.