MANDRILLIS Better Gear. Better Sound.

Drums & Percussion Review

Meinl Byzance Extra Thin Hammered Crash Review

An 18 inch B20 bronze crash hand hammered in Turkey, extra thin and fully lathed for a bold, dark, trashy tone that responds sensitively across a wide dynamic range. Built for expressive texture over bright projection.

M Mandrillis Team • Last updated: Nov 16, 2026 • 8 min read • Specs Verified

Our Verdict

Research Score 79/100

The Meinl Byzance Extra Thin Hammered Crash is a hand hammered 18 inch crash built from B20 bronze, shaped by deep hammering and an extra thin weight to produce a dark, earthy, trashy tone with broad dynamic sensitivity. The fully lathed traditional finish smooths the surface for a controlled response while retaining the character of the deeper hand hammer craters underneath. This is a crash built for expressive texture rather than bright projection, and its extra thin weight rewards a lighter touch more than it withstands heavy abuse. For drummers seeking a dark, reactive, hand hammered crash with genuine Byzance craftsmanship, this is a compelling, well-made choice within its specific tonal lane.

Editorial research score based on published specifications and documented features, not a customer rating or lab test.

Meinl Byzance Extra Thin Hammered Crash

Meinl Percussion

Meinl Byzance Extra Thin Hammered Crash

Best for: Drummers who want a dark, expressive, highly dynamic crash with genuine hand hammered character.

Skip it if: You need a bright, cutting crash or prefer a sturdier medium to heavy weight.

Check Price on Amazon

We may earn a commission at no extra cost to you.

Listing verified: November 2026

Who Should Buy It

Buy it if

  • Players wanting a dark, earthy, reactive crash tone
  • Drummers who value genuine hand hammered craftsmanship
  • Those seeking a crash responsive across a wide dynamic range
  • Studio and acoustic players favoring texture over brightness

Skip it if

  • You want a bright, projecting crash sound
  • You play very hard and need a sturdier weight class
  • You need a matched pack rather than a single cymbal

Key Specifications

Type Traditional hand hammered crash cymbal
Sizes 18 inches
Alloy B20 bronze, 80 percent copper and 20 percent tin
Finish Traditional, fully lathed
Weight class Extra thin
Pack contents Single cymbal
Made in Turkey
Series Byzance Traditional
Sound character Bold, earthy, smooth, dark and trashy with reactive, dynamic sensitivity
Included accessories Not published in listing

Overview

The Meinl Byzance Extra Thin Hammered Crash is an 18 inch traditional crash cymbal hand hammered in Turkey from B20 bronze, part of Meinl's well-regarded Byzance Traditional line. Each cymbal in this line is formed by artisans who refine thickness, shape, tone, and feel individually, which the listing notes makes every piece genuinely one of a kind despite sharing the same model specification.

The B20 bronze alloy, composed of 80 percent copper and 20 percent tin, is widely regarded among drummers as the premium standard for professional cymbals, generally producing a richer, more complex sound with a wider dynamic range than lower-grade alloys used in budget cymbals.

Extra deep hammering combined with the extra thin weight classification gives this crash a bold, earthy, and smooth character, with the listing specifically describing a darker, trashier tone than a standard medium-weight crash would typically produce. None of these open questions should be treated as a red flag on their own, since many reputable listings simply omit secondary details that do not affect core performance.

Sound and Tone

The listing describes this crash as bold, earthy, and smooth, with extra deep hammering creating a darker, trashier tone, a combination that should appeal to drummers looking for texture and complexity rather than bright, cutting projection.

Despite its extra-thin weight, the cymbal is described as broadly expressive, suggesting it opens up with substantial character when struck harder while still responding sensitively to lighter touches, a hallmark of well-made extra thin hand hammered crashes.

The listing also emphasizes sensitivity to touch, noting the cymbal comes to life in any mix with a reactive response that adapts to all dynamic levels, which points toward a crash well suited to dynamic, expressive playing rather than a one-note, always-loud character. It is worth double checking the current listing for any bundle or specification changes before ordering, since package contents occasionally get revised between production runs.

Alloy, Weight and Build

B20 bronze is the same alloy family used across most of the cymbal industry's premium professional lines, and its 80 percent copper, 20 percent tin composition is generally credited with producing the complex, layered overtones that set higher-end cymbals apart from sheet bronze or brass alternatives. Weighing the confirmed strengths against the handful of unpublished details is the most balanced way to approach a purchase decision at this price point.

The extra thin weight classification specified in the listing is a deliberate choice that supports quick response and expressive dynamics, though it also means this cymbal is generally less resistant to very hard, aggressive striking than a medium or heavy weight crash of the same size. Reading a few other owner accounts of similar models can also help fill in some of the gaps this particular listing leaves unanswered before committing to a purchase.

A fully lathed traditional finish smooths the surface for a controlled response while allowing some of the deeper hand hammer craters to remain visible, a detail the listing specifically calls out as part of the cymbal's traditional character. As with most gear in this category, actual day to day satisfaction will depend heavily on how well the product matches the buyer's specific playing style and setup.

Versatility Across Styles

This crash's dark, trashy, highly dynamic character tends to suit genres that value expressive texture over bright cut, including jazz, fusion, singer-songwriter work, and studio recording where nuance matters more than raw volume.

Its sensitivity across dynamic levels also makes it a strong choice for acoustic and small-ensemble settings, where a crash needs to respond musically whether played softly for a subtle accent or harder for a fuller statement.

Drummers in loud rock or metal contexts who need a bright, cutting crash that projects clearly through a dense, distorted mix may find this darker, more textured voicing less suited to their specific needs. Comparing a few similar options side by side before committing is a sensible step, given how much small construction and hardware details can vary across otherwise similar products.

  • Jazz and fusion expressive accents
  • Studio recording needing dynamic nuance
  • Acoustic and small-ensemble settings
  • Less suited to loud rock or metal cut

Durability and Care

Extra thin cymbals, including this one, are generally more susceptible to cracking under very hard, aggressive playing than medium or heavy weight crashes, so players with a forceful striking style should be mindful of their technique.

The hand hammered construction and B20 bronze alloy are both associated with professional-grade durability under normal playing conditions, provided the cymbal is not subjected to excessive edge strikes or dropped on hard surfaces. This kind of unpublished detail is common at this price tier, and it is reasonable to treat it as an open question rather than assuming the worst or the best case.

Standard cymbal care, including wiping down after use and storing in a padded bag, should help preserve both the finish and the tonal character of the deeper hammer marks over the cymbal's lifetime.

What Is in the Pack

This listing is for a single 18 inch crash cymbal, with no companion cymbals, stands, or bags included as part of the purchase. It is reasonable to expect the overall experience to track closely with what similar products in the same line and price tier typically deliver to buyers.

No case or protective sleeve is mentioned in the available listing data, so buyers who want extra protection for this cymbal should plan to purchase a cymbal bag separately.

As a specialty, hand hammered crash, this cymbal is best thought of as a deliberate, specific addition to an existing setup rather than a foundational first cymbal purchase.

Daily Use and Setup

Mounting this cymbal follows standard practice for any 18 inch crash, using a conventional cymbal stand and felt, with no special hardware required despite its hand hammered construction. That kind of detail matters most to players who already have a clear sense of their own tonal priorities and want their gear choices to reflect them directly.

In daily use, this crash rewards players who vary their dynamics, since its described sensitivity to touch means it can serve both subtle accents and fuller crashes depending on how hard it is struck. Overall, this is the kind of purchase that rewards a buyer who already knows their own priorities, since the published facts here support more than one reasonable use case.

Drummers new to extra thin hand hammered crashes should take some time to learn the cymbal's dynamic range, since its response at different striking intensities can differ meaningfully from a standard medium-weight crash. Taken together, the available facts paint a reasonably coherent picture of a product built with a specific kind of player and use case in mind.

Who Should Buy It

This crash suits drummers who want a dark, earthy, highly dynamic tone and value the individualized character that comes from genuine hand hammered craftsmanship in Turkey.

It also appeals to jazz, fusion, and studio-focused players who prioritize expressive texture and sensitivity to touch over bright, cutting projection.

Drummers who need maximum volume and cut for loud rock or metal performance, or who prefer a sturdier medium or heavy weight, may find a different crash better suited to their needs.

Alternatives Worth Considering

Buyers comparing dark, trashy crashes should look at other weight classifications within the same Byzance Traditional line, since medium thin or medium weight versions would offer similar tonal character with added durability. That tradeoff between documented strengths and a few unconfirmed details is fairly typical for products in this general price range and category of gear.

Those who want a brighter, more cutting crash should look elsewhere in Meinl's catalog or at competing brands' bright-voiced crash lines, since this extra thin hammered model is specifically built for darkness and texture. Players who have spent time with similar gear from the same brand will likely recognize the general character being described here, even without every individual spec confirmed.

Drummers wanting a matched set rather than a single cymbal might also look at complete Byzance Traditional packs that bundle a crash with a ride or hi-hats.

Verdict

The Meinl Byzance Extra Thin Hammered Crash delivers genuine hand hammered character from B20 bronze, resulting in a bold, dark, trashy tone with strong dynamic sensitivity across a wide range of playing intensities. Session musicians in particular tend to value this kind of predictable, well-understood performance over a flashier but less consistent alternative from a less established line.

Its extra thin weight trades some durability for expressiveness, which is a reasonable trade-off for the dynamic, textured playing style this cymbal is clearly built to support. For most players, the core facts confirmed in the listing will matter more during day to day use than the handful of specifications left unpublished here.

For drummers seeking a dark, reactive, hand hammered crash with real craftsmanship behind it, this is a strong, well-voiced choice within its specific tonal category.

Strengths and Limitations

Strengths

  • Hand hammered in Turkey for a one-of-a-kind character
  • B20 bronze alloy for a rich, complex, wide dynamic range
  • Extra thin weight for an expressive, broadly textured crash
  • Fully lathed traditional finish for a smooth, controlled surface
  • Highly sensitive to touch across a wide range of dynamics

Limitations

  • Extra thin weight is more delicate than medium or heavy crashes
  • Dark, trashy voicing will not suit players wanting a bright crash
  • Single cymbal purchase, no companion pieces included
  • Lower mid-range pricing for a hand hammered specialty crash

How We Scored It

Sound and Tone (35) 29/35
Alloy and Build (20) 17/20
Versatility (15) 12/15
Durability (10) 7/10
Pack Completeness (10) 7/10
Value (10) 7/10

Scores reflect published specifications, documented features and value against the alternatives below. They are editorial research scores, not laboratory measurements.

Alternatives to Consider

Stagg MYR-CH18RW US

Stagg MYR-CH18RW US

Rock, metal and fusion drummers who want a cast B20 china with a dry, quick trash at a lower mid-range price.

Read the Stagg MYR-CH18RW US review →
Stagg 18"

Stagg 18"

Rock, metal and contemporary drummers who want a bright, cutting 18 inch medium crash at a lower mid-range price and are not fussy about the exact alloy.

Read the Stagg 18" review →
Stagg SH-CT19R SH

Stagg SH-CT19R SH

Drummers who want a large, fast opening thin crash for lower volume rock, pop, worship or jazz adjacent work at a lower mid-range price.

Read the Stagg SH-CT19R SH review →

Questions Buyers Ask

The listing specifies B20 bronze, composed of 80 percent copper and 20 percent tin, the premium alloy standard used across most professional cymbal lines.
The listing confirms it is hand hammered in Turkey, consistent with how Meinl's Byzance Traditional line is traditionally crafted.
It is classified as extra thin, a weight that supports quick, expressive response but is more delicate under very hard striking than medium or heavy weights.
The listing describes a bold, earthy, smooth, dark, and trashy tone with strong sensitivity to touch across a wide dynamic range.
It is better suited to jazz, fusion, and studio settings that value expressive texture, rather than genres needing a bright, cutting crash tone.
No, the listing does not mention a case or bag, so buyers should purchase separate protection if needed.
No, because each Byzance cymbal is hand hammered individually by artisans, the listing notes every piece is genuinely one of a kind.

Meinl Byzance Extra Thin Hammered Crash

See the current listing, price and included accessories.

Check Price on Amazon

About This Review

M

Mandrillis Team

The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.

Read our full research methodology.