Guides
How to Stop Headphones From Hurting the Top of Your Head
A sore spot on the crown of your head is one of the most common headphone complaints. It comes from weight pressing on a small area of the headband. This guide explains why it happens, eight fixes from free adjustments to padding, and what to look for in a more comfortable pair.
Quick Answer
To stop headphones from hurting the top of your head, spread the weight over a wider area. Lengthen the headband so the ear pads carry more of the weight, add a cushioned headband cover, and take short breaks every hour. If the pain continues, choose lighter headphones or a model with a suspension headband.
How this guide was put together
This guide is based on manufacturer manuals, published specifications and widely used audio reference standards. Mandrillis does not run hands-on tests for these guides, so treat figures as typical values and check the manual for your own gear before changing settings.
Why Headphones Hurt the Top of Your Head
Over-ear headphones rest on two places: your ears and the top of your head. When most of the weight sits on the crown, it presses on a small strip of skin. After an hour or two, that steady pressure becomes a sore spot.
The problem is usually not how heavy the headphones are in total. It is how that weight is spread. A light pair with a thin, hard headband can hurt more than a heavier pair with a wide, soft one.
- A narrow or thin headband concentrates pressure on one spot.
- A headband set too short pushes down harder on the crown.
- Worn padding loses its cushion over time.
- Heavier headphones, often over 300 grams, make every issue worse.
Causes of Head Pain and Quick Fixes
Find the cause that matches your headphones.
| Cause | How to tell | Quick fix |
|---|---|---|
| Headband set too short | Ear pads barely touch your ears | Lengthen both sides evenly |
| Thin or hard padding | Pain after under an hour | Add a headband cushion |
| Worn padding | Foam feels flat or cracked | Replace the headband pad |
| Heavy headphones | Neck feels tired too | Switch to a lighter model |
| Narrow contact point | Pain in one small spot | Shift the band forward or back |
8 Ways to Stop Headphones From Hurting
Start with the free adjustments. Many people fix the problem in a minute just by changing how the headband sits.
1. Lengthen the Headband
When the headband is too short, the ear pads pull up and the band presses down on your crown. Extend both sides by one or two clicks.
The goal is for the ear pads to sit fully around your ears and carry part of the weight. Keep both sides at the same setting so the headphones sit level.
2. Move the Band Slightly Forward or Back
The very top of the head is often the most sensitive spot. Sliding the headband a little toward your forehead or toward the back of your head can move pressure to a less sensitive area.
Make sure the ear pads still cover your ears fully after the change.
3. Add a Headband Cushion or Cover
Padded headband covers wrap around the existing band, usually with a zip or hook-and-loop strap. They add foam or gel and spread the weight over a wider area.
Choose one that fits your headband's width. A cover that is too loose can slide around and create new pressure points.
4. Replace Worn Headband Padding
Headband foam flattens over the years. Many studio models sell replacement headband pads that fit in minutes.
Check your model's manual or the maker's spare parts list. Replacing worn ear pads at the same time also helps, since flat ear pads make the band sit lower.
5. Take Short Breaks
Even comfortable headphones press on the same spot for hours. Lift them off for a few minutes every hour to let the skin recover.
Breaks also help your hearing. Many hearing guides suggest a short rest each hour during long listening.
6. Wear a Hat or Headband Underneath
A thin beanie or soft cloth headband adds a layer of cushion. It is a quick fix when you are at home and comfort matters more than looks.
Keep it thin, or it may break the ear pad seal and reduce bass.
7. Loosen the Clamping Force
Very tight headphones push the ear pads into your head, and some people tense their scalp in response. Gently stretching the headband over a stack of books overnight can ease a tight fit.
Only stretch a little at a time, and avoid this with plastic headbands that could crack.
8. Switch to a Lighter or Better Designed Pair
If nothing helps, the headphones may simply be too heavy or poorly balanced for your head. Many comfortable over-ear models weigh around 200 to 300 grams.
Look for a wide, soft headband or a suspension headband, which uses a strap that rests on the head while the outer band carries the load.
What to Look For in Comfortable Headphones
If you are buying new headphones, check these points on the spec sheet and in photos. Comfort comes from design choices, not price alone.
- Weight under about 300 grams for long sessions.
- A wide headband with thick padding or a suspension strap.
- Soft, deep ear pads that fit fully around your ears.
- Adjustable sliders with fine steps.
- Replaceable headband and ear pads for long term comfort.
Do Some Headphone Types Hurt Less?
Different designs spread weight in different ways. If over-ear headphones keep bothering you, another style may suit you better.
On-Ear and In-Ear Options
On-ear headphones are usually lighter, but they press on the ears instead. They can suit short sessions but often hurt the ears over long ones.
In-ear headphones and earbuds put no weight on your head at all. They are a good option if crown pain is your main problem.
Open Back Headphones
Many open back models use lighter shells and roomier ear pads. They are often comfortable for long listening at home.
They leak sound, so they suit quiet rooms rather than shared spaces.
When to Talk to a Doctor
A sore spot from headphones should fade within a day once you stop wearing them. Pain that lasts, headaches that start with headphone use, or skin that breaks or bruises are worth checking with a doctor.
Tension headaches can also be triggered by tight headphones. If you notice a pattern, loosen the fit and take more breaks.
Comfortable Over-Ear Headphones From Our Reviews
Over-ear pairs known for padded headbands and replaceable parts, which help with long listening sessions.
Beyerdynamic DT 700 PRO X
Mentioned
Who Should Buy It
- Recording musicians who need closed-back isolation
- Home studio owners wanting a single headphone for mixing and tracking
- Listeners who prefer a wired, passive design and do not need Bluetooth
- Anyone with lower powered sources like phones or laptops who wants detailed sound
Skip It If
- You require active noise cancelling for travel
- You want wireless freedom and a built-in mic for calls
- You need a lightweight portable headphone with a carrying case
We may earn a commission at no extra cost to you.
Last verified: October 2026
Sony MDR7506
Mentioned
Who Should Buy It
- Studio musicians and recording engineers on a budget
- Home audio listeners who prefer wired simplicity
- Video editors or podcasters who need long cable reach
- Anyone who wants passive isolation without battery dependency
Skip It If
- You need active noise cancelling for loud environments
- You want Bluetooth wireless convenience
- You require a detachable cable for easier packing and repair
We may earn a commission at no extra cost to you.
Last verified: October 2026
Audio-Technica ATH-M50X
Mentioned
Who Should Buy It
- Audio engineers and music producers
- Listeners who prefer a wired connection
- Users who need passive isolation in loud rooms
- Budget buyers who want a proven studio design
Skip It If
- You want active noise cancelling
- You need Bluetooth and a battery
- You take frequent calls without a separate mic
We may earn a commission at no extra cost to you.
Last verified: October 2026
Keep Reading
Related guides and picks on Mandrillis:
- Best Over-Ear Headphones : comfortable picks for long sessions
- Can You Use Studio Headphones for Everyday Listening? : studio pairs with replaceable pads
- Best Studio Headphones : models with spare headband parts
FAQs
About This Guide
Mandrillis Team
The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.
Read our full research methodology.