MANDRILLIS Better Gear. Better Sound.
Why Does My Acoustic Guitar Buzz on Certain Frets? (Fixes)

Guides

Why Does My Acoustic Guitar Buzz on Certain Frets? (Fixes)

Fret buzz that shows up only on certain frets is a useful clue. It often points to one high fret, too little neck relief or a seasonal humidity change rather than a problem with the whole guitar. This guide shows how to find the cause with simple checks and which fixes are safe to try at home.

Quick Answer

An acoustic guitar usually buzzes on certain frets because one fret sits higher than the others, the neck has too little relief, or dry air has changed the neck and action. Poor finger placement can also cause it. Check your technique first, then check humidity and neck relief. A raised fret needs a fret level from a technician.

D Daniel Brooks • Editor, Audio and Music Gear • Last updated: Nov 22, 2026 • 6 min read

How this guide was put together

This guide is based on manufacturer manuals, published specifications and widely used audio reference standards. Mandrillis does not run hands-on tests for these guides, so treat figures as typical values and check the manual for your own gear before changing settings.

What Fret Buzz Is

Fret buzz happens when a vibrating string touches a fret it should not touch. The string rattles against the metal and makes a buzzing sound.

Where the buzz appears tells you a lot. Buzz on every fret points to low action overall, while buzz on just a few frets points to a local problem.

  • Buzz on open strings only: often a low nut slot.
  • Buzz on frets 1 to 5: often too little neck relief.
  • Buzz on one or two frets: often a high fret just above them.
  • Buzz high up the neck: often a raised fret end or neck hump.
  • Buzz in winter only: often dry air.

Start With Your Technique

Before changing anything on the guitar, check how you fret notes. Many beginners press too far from the fret, which lets the string touch the metal.

Press just behind the fret, not on top of it or in the middle of the space. Use firm but not crushing pressure.

Technique Checklist

Try these and play the buzzing note again.

  • Place your fingertip just behind the fret.
  • Press with the tip, not the flat pad of the finger.
  • Keep other fingers from touching nearby strings.
  • Strum a little lighter to see if the buzz drops.
  • Ask someone else to play the same note.

Where It Buzzes and the Likely Cause

Use the location of the buzz to narrow down the problem.

Where it buzzes Likely cause Fix
Open strings only Nut slot too low Nut shim or replacement by a tech
Low frets, 1 to 5 Too little neck relief Truss rod adjustment
One or two frets High fret above them Fret level or seat by a tech
Upper frets Neck hump or raised fret ends Fret work by a tech
Everywhere, in winter Dry air Humidify the guitar

Find the High Fret

If a note buzzes at one fret, the problem is often the next fret up. That higher fret is touching the string before it should.

You can check with a short straight edge, such as a credit card edge or a fret rocker tool. Lay it across three frets at a time. If it rocks, the middle fret is high.

  • Check under each string that buzzes.
  • Press the fret down gently to see if it moves.
  • Raised frets often lift in dry weather.
  • Fixing one is a job for a technician.

Check the Humidity

Acoustic guitars are made of thin wood that reacts to moisture. In dry air, the top can sink and the neck can move, which lowers the action and can cause buzz.

Dry air also shrinks the fretboard, which can make fret ends stick out or frets lift. Aim to keep the guitar at about 45 to 55 percent humidity.

Simple Humidity Steps

These steps are inexpensive and protect the guitar long term.

  • Use a small hygrometer to measure humidity.
  • Keep the guitar in its case with a soundhole or case humidifier in dry months.
  • Keep it away from heaters and air vents.
  • Avoid leaving it in a car.

Check the Neck Relief

Relief is a slight forward bow in the neck. It gives the strings room to vibrate. Too little relief often causes buzz on the low frets.

To check, press the low E string at the first fret and at the fret where the neck meets the body. Look at the gap at about the 7th fret. Many guitars suit a gap of about 0.010 inch, about the thickness of a business card.

Truss Rod Adjustments: Go Slowly

The truss rod controls neck relief. Turning it a small amount counterclockwise usually adds relief, which can stop low fret buzz.

Turn it no more than a quarter turn at a time, then let the neck settle for a few hours. If the rod feels stuck or very tight, stop and take the guitar to a technician, since forcing it can break the rod.

  • Use the correct size tool for your guitar.
  • Slack the strings slightly before turning.
  • Quarter turn maximum, then wait and recheck.
  • Do not use the truss rod to set action height.

Check the Strings

Lighter strings vibrate in a wider path and can buzz more on a low setup. Very old strings can also buzz and sound dull.

If you recently switched to a lighter gauge, the guitar may need a setup to match. Fresh strings of the gauge the guitar was set up for often help.

Rule Out Other Rattles

Not every buzz comes from the frets. Loose parts can rattle at certain notes and sound just like fret buzz.

  • Loose tuner nuts or washers on the headstock.
  • A loose truss rod cover.
  • A loose pickup cable inside the body.
  • String ends touching the top behind the bridge.
  • A loose brace inside the guitar, which needs a technician.

When to See a Technician

Fret leveling, seating a raised fret, saddle work and nut work all need special tools and skill. A professional setup often fixes several small issues at once.

A basic setup is a common and affordable service. It usually includes truss rod adjustment, action height, nut slots and checking for high frets.

Preventing Fret Buzz

Most buzz can be prevented with steady care. Keep humidity stable, change strings regularly and get a setup when seasons change.

  • Keep humidity around 45 to 55 percent.
  • Change strings every few months, or more often if you play daily.
  • Store the guitar in its case.
  • Get a setup once or twice a year.

Check the Action Height

Action is the height of the strings above the frets. If it is very low, small differences in fret height cause buzz much more easily.

Measure at the 12th fret, from the top of the fret to the bottom of the string. Many acoustic guitars are set around 3/32 inch on the low E string and 2/32 inch on the high E. If yours is much lower, raising the saddle slightly, usually with a shim or new saddle, can stop the buzz.

  • Use a small steel ruler marked in 64ths.
  • Measure with the guitar in tune.
  • Saddle changes are best done by a technician.

The Bottom Line

Buzz on certain frets usually comes from technique, a high fret, too little relief or dry air. Check your fretting first, then humidity and neck relief.

Small truss rod changes are fine if done slowly. A high fret, nut or saddle work is best left to a technician.

Acoustic Guitars From Our Reviews

Popular beginner acoustic guitars that benefit from a good setup.

Fender CD-60S

Fender CD-60S

Mentioned

Who Should Buy It

  • Beginners who want a recognizable Fender acoustic with a warranty
  • Players who prefer the warm, midrange-rich sound of an all mahogany body
  • Strummers looking for a dreadnought with strong bass and volume
  • Buyers who do not need electronics and are comfortable with a full-size body

Skip It If

  • You require a pickup or preamp for live performance
  • You need precise neck dimensions like nut width and scale length to ensure fit
  • You want a smaller travel or parlor style guitar
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Fender CC-60S

Fender CC-60S

Mentioned

Who Should Buy It

  • Beginners and returning players who want an accessible acoustic
  • Smaller players or anyone with lighter finger strength
  • Value-focused buyers who want a known brand and a warranty
  • Songwriters and couch practice players looking for a simple workhorse

Skip It If

  • You need to plug in regularly for gigs or open mics
  • You want an all-solid wood acoustic with maximum resonance
  • You expect a case or detailed hardware specifications to be included
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Fender FA-25

Fender FA-25

Mentioned

Who Should Buy It

  • New players who want a full-size acoustic with a recognizable brand
  • Practicing musicians who value a lightweight laminate body and beginner-focused neck
  • Anyone who will use the included Fender Play subscription for structured learning
  • Players who prefer the bold low end of a dreadnought for strumming

Skip It If

  • You already own a solid-top acoustic and want an upgrade in tone
  • You need a built-in pickup for live performance or recording
  • Specific neck dimensions like nut width are a dealbreaker for your hand size
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Keep Reading

Related guides and picks on Mandrillis:

FAQs

The next fret up is often slightly high. A technician can level or reseat it.
Yes, dry air can lower the action and lift frets. Keep the guitar at about 45 to 55 percent humidity.
Small quarter turn changes are fine if you go slowly and wait between them. If the rod feels stuck, take it to a technician.

About This Guide

D

Daniel Brooks

Daniel Brooks edits the buying guides and how-to articles at Mandrillis. He works from manufacturer manuals, published specifications and common owner questions to explain music and audio gear in plain language, from turntables and headphones to digital pianos and electronic drums.

Read our full research methodology.