MANDRILLIS Better Gear. Better Sound.
How to Clean Velour Headphone Ear Pads (Safe Step-by-Step)

Guides

How to Clean Velour Headphone Ear Pads (Safe Step-by-Step)

Velour ear pads feel soft and breathe well, but they soak up sweat, skin oil and dust. This guide shows a quick weekly clean, a safe deep wash, how to dry pads without shrinking or flattening the foam, what never to use, and how to tell when pads need replacing.

Quick Answer

To clean velour headphone ear pads, remove them from the headphones, brush or vacuum off loose dust, then gently wash them in lukewarm water with a few drops of mild soap. Squeeze, do not wring, and rinse well. Press out water with a towel and let them air dry for at least 24 hours before refitting.

M Mandrillis Team • Expert guides. Real advice. • Last updated: Nov 21, 2026 • 5 min read

How this guide was put together

This guide is based on manufacturer manuals, published specifications and widely used audio reference standards. Mandrillis does not run hands-on tests for these guides, so treat figures as typical values and check the manual for your own gear before changing settings.

Why Velour Pads Need Regular Cleaning

Velour is a soft, fuzzy fabric that lets heat and air escape, which is why many people find it cooler than leather. The same open weave traps skin oil, sweat, hair and dust.

Over months, that buildup makes pads feel stiff and smell stale. It can also irritate skin and shorten the life of the foam inside.

  • Pads look darker or shiny where they touch your skin.
  • The fabric feels stiff instead of soft.
  • A stale or sour smell when you lift the headphones.
  • Skin irritation after long sessions.

Before You Start: Check How Your Pads Come Off

Most velour pads come off the headphones so you can clean them without getting water near the drivers. Never wash pads while they are attached.

Check your manual first. Pads usually remove in one of three ways.

  • Twist and lift: rotate the pad a little, then pull it free of the clips.
  • Stretch over a lip: gently peel the pad edge off a plastic rim, working around it.
  • Snap off: pull straight out from small plastic clips.
  • Note the orientation, since some pads are thicker at the back.

Cleaning Methods Compared

Pick the method that matches how dirty the pads are.

Method When to use Drying time
Brush or lint roller Weekly, loose dust and hair None
Damp cloth wipe Light sweat, every few weeks 1 to 2 hours
Hand wash with mild soap Stains, smell, every few months At least 24 hours
Machine wash Never Can ruin foam and shape
Replace the pads Torn fabric or flat foam Not needed

Quick Weekly Clean

A two minute routine once a week keeps pads fresh and means deep washes are rarely needed. You do not need to remove the pads for this.

Brush, Roll or Vacuum

Use a soft clothes brush, a lint roller or a vacuum with a brush attachment on its lowest setting. Work in one direction to lift dust and hair from the fibers.

Hold the headphones with the pads facing down so dust falls away from the drivers.

Air Them Out

After a long session, leave the headphones on a stand rather than in a closed case. Air flow lets sweat dry out before it settles into the foam.

Deep Clean: Step by Step

Do this every few months, or when pads smell or look stained. Plan for a full day of drying, so do it when you will not need the headphones.

Step 1: Remove and Dust

Take the pads off following your model's method. Brush or vacuum them first so you are not washing loose dust deeper into the fabric.

Step 2: Mix a Gentle Wash

Fill a bowl with lukewarm water, not hot. Add a few drops of mild, unscented soap or a gentle wool wash. Strong detergents and hot water can shrink velour and break down foam.

Step 3: Wash by Hand

Dip each pad and gently squeeze it a few times, like a sponge. Rub stained areas lightly with your fingertips.

Do not twist or wring the pads. Twisting can tear the stitching and deform the foam.

Step 4: Rinse Well

Rinse in clean lukewarm water, squeezing gently until no suds appear. Leftover soap can irritate skin and attract dirt.

Step 5: Dry Slowly

Press each pad between a dry towel to remove as much water as possible. Then set them on a rack, face up, in a room with good air flow.

Let them dry for at least 24 hours, and up to 48 hours for thick pads. Refit them only when the foam feels completely dry inside.

What Never to Use

Some common cleaning shortcuts damage velour or the foam underneath. Avoid all of these.

  • Hair dryers, heaters or direct sun: heat can shrink fabric and harden foam.
  • Washing machines and dryers: they crush and tear the pads.
  • Bleach or strong detergents: they fade and weaken the fabric.
  • Soaking for hours: water fills the foam and takes days to dry.
  • Washing pads while attached: water can reach the drivers.

A Note on Leather and Protein Leather Pads

Leather and synthetic leather pads need a different approach. Do not soak them in water.

Wipe them with a soft cloth lightly dampened with water and a drop of mild soap, then dry with a clean cloth. A small amount of leather conditioner on real leather keeps it from cracking.

How to Keep Velour Pads Clean Longer

Good habits cut down how often you need a deep wash. Most dirt comes from skin, hair products and sweat, so small changes make a big difference.

Some people keep a second set of pads and swap them while one set dries. That way the headphones are never out of use on wash day.

Daily Habits

These take seconds and keep pads fresh between cleanings.

  • Put headphones on after hair products and lotions have dried.
  • Wipe sweat from your face and ears before long sessions.
  • Store headphones on a stand, not face down on a desk.
  • Use breathable pad covers during workouts or hot weather.
  • Wash your hands before adjusting the pads.

When to Replace Instead of Clean

Cleaning cannot fix worn foam or torn fabric. Replacement pads often cost little and can make old headphones feel new again.

Fresh pads can also restore sound, because flattened foam changes the distance between the driver and your ear.

  • The foam stays flat after you press it.
  • The fabric has holes, thin spots or loose stitching.
  • Bass sounds weaker than it used to, due to a poor seal.
  • Pads still smell after a careful deep clean.

Headphones With Replaceable Ear Pads

Models from our reviews with pads you can remove for cleaning or replace when they wear out.

Sennheiser HD 650

Sennheiser HD 650

Mentioned

Who Should Buy It

  • Audiophiles seeking a classic open-back dynamic headphone known for low distortion and natural tone
  • Critical listeners who want a wired, passive headphone for focused home listening
  • Buyers who already own a headphone amplifier or high quality source and want a lower mid-range open-back option
  • Studio or mixing engineers who prefer open-back headphones for monitoring without isolation

Skip It If

  • You need active noise cancelling or passive isolation for noisy environments
  • You want Bluetooth wireless connectivity or built-in controls and microphone
  • You need a portable or lightweight headphone, as weight and dimensions are not published and the open-back design is not travel friendly
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Beyerdynamic DT 700 PRO X

Beyerdynamic DT 700 PRO X

Mentioned

Who Should Buy It

  • Recording musicians who need closed-back isolation
  • Home studio owners wanting a single headphone for mixing and tracking
  • Listeners who prefer a wired, passive design and do not need Bluetooth
  • Anyone with lower powered sources like phones or laptops who wants detailed sound

Skip It If

  • You require active noise cancelling for travel
  • You want wireless freedom and a built-in mic for calls
  • You need a lightweight portable headphone with a carrying case
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Audio-Technica ATH-M50X

Audio-Technica ATH-M50X

Mentioned

Who Should Buy It

  • Audio engineers and music producers
  • Listeners who prefer a wired connection
  • Users who need passive isolation in loud rooms
  • Budget buyers who want a proven studio design

Skip It If

  • You want active noise cancelling
  • You need Bluetooth and a battery
  • You take frequent calls without a separate mic
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Keep Reading

Related guides and picks on Mandrillis:

FAQs

No, a washing machine can crush the foam and tear the stitching. Hand wash them gently in lukewarm water with mild soap instead.
Plan for at least 24 hours in a room with good air flow. Thick pads can take up to 48 hours to dry fully inside.
Brush them weekly and give them a deep wash every few months. Clean them sooner if they smell or you sweat a lot.

About This Guide

M

Mandrillis Team

The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.

Read our full research methodology.