MANDRILLIS Better Gear. Better Sound.
Can You Connect a Turntable to a Soundbar? (4 Easy Ways)

Guides

Can You Connect a Turntable to a Soundbar? (4 Easy Ways)

Yes, you can play vinyl through a soundbar, but most soundbars expect a line-level signal and many have no analog input at all. This guide explains the four ways to connect, which one suits your gear, and how to avoid quiet sound, hum and Bluetooth delay.

Quick Answer

Yes, you can connect a turntable to a soundbar. Use the soundbar's analog AUX input if it has one, with the turntable's built-in preamp set to LINE or an external phono preamp. If the soundbar only has optical or HDMI, use a phono preamp with an optical output or an analog-to-digital converter. Bluetooth turntables can pair directly.

M Mandrillis Team • Expert guides. Real advice. • Last updated: Nov 21, 2026 • 6 min read

How this guide was put together

This guide is based on manufacturer manuals, published specifications and widely used audio reference standards. Mandrillis does not run hands-on tests for these guides, so treat figures as typical values and check the manual for your own gear before changing settings.

The One Thing to Know First: Phono vs. Line

A turntable cartridge makes a very weak signal called phono level, about 5 millivolts for a typical cartridge. Soundbars expect line level, which is roughly a hundred times stronger.

A phono preamp boosts the signal to line level and corrects the bass and treble balance used when records are made. You need exactly one preamp between the turntable and the soundbar. Many turntables have one built in.

  • Turntable with a PHONO and LINE switch: it has a built-in preamp. Set it to LINE.
  • Turntable with no switch: it needs an external phono preamp.
  • Bluetooth turntable: the preamp is built in, and the wireless signal is already line level.

Check What Inputs Your Soundbar Has

Look at the back or underside of the soundbar. The inputs decide which connection method you can use.

  • AUX or analog in: a 3.5 mm jack or a pair of RCA jacks. This is the easiest route.
  • Optical or TOSLINK: a square digital port with a small door.
  • HDMI ARC or eARC: meant for the TV, not for direct turntable use.
  • Bluetooth: wireless pairing with a Bluetooth turntable.

4 Ways to Connect a Turntable to a Soundbar

Pick the method that matches your soundbar's inputs. Turn the soundbar volume down before plugging anything in.

1. Analog AUX Input

This gives the simplest and most reliable result. Use an RCA cable, or an RCA to 3.5 mm cable if the soundbar has a small headphone-style jack.

Plug the turntable's RCA outputs into the soundbar's AUX input. Set the turntable switch to LINE, or connect an external phono preamp in between. Then select AUX on the soundbar.

  • Red plug is right, white or black is left.
  • If the cable is too short, use a quality RCA extension.
  • Connect the turntable's ground wire to the preamp if it has one.

2. Optical Input With a Converter or Preamp

Many soundbars only have optical and HDMI. A turntable's analog signal cannot go straight into an optical port.

Use a phono preamp that has an optical output, or connect the turntable's line output to a small analog-to-digital converter. Then run an optical cable from the converter to the soundbar and select the optical input.

3. Bluetooth

A Bluetooth turntable can pair with a Bluetooth soundbar. Put the soundbar in pairing mode, then start pairing on the turntable following the maker's steps.

It is the tidiest setup, with no cables between them. Sound quality depends on the Bluetooth version and codec both devices support.

4. Through the TV

Some setups route everything through the TV. If your TV has an analog audio input and passes it to the soundbar through HDMI ARC or optical, you can connect the turntable to the TV.

This only works if the TV supports passing external audio through. Many TVs do not, so check the TV manual before you buy cables.

Fixing Common Problems

Most problems after connecting come from the preamp setting or soundbar sound modes. Check these before you buy anything new.

Sound Is Very Quiet or Thin

No preamp is active. Set the turntable switch to LINE, or add an external phono preamp.

Also check the soundbar is on the right input. A soundbar left on the TV input will play nothing from the turntable.

Sound Is Loud, Harsh and Distorted

Two preamps are active, for example the turntable set to PHONO feeding a preamp that is already on. Make sure only one preamp is boosting the signal.

Turn off extra sound modes like bass boost or virtual surround, which can make records sound muddy.

Bluetooth Delay or Dropouts

Keep the turntable and soundbar within about 30 feet with a clear line between them. Walls, microwaves and Wi-Fi routers can interrupt the signal.

A small delay does not matter for music on its own. If dropouts continue, switch to a wired AUX connection.

Humming Noise

A hum usually means the turntable needs a ground connection. Connect its ground wire to the preamp's GND post.

Keep the turntable away from the soundbar and any subwoofer, which can also cause feedback at higher volume.

Best Soundbar Settings for Records

Soundbars are tuned for TV and movies, with modes that boost dialogue and add fake surround. Those modes can make vinyl sound odd.

Choose a music or stereo mode if your soundbar has one. Start with the bass and treble at their center settings, then adjust slowly by ear.

Settings to Change

Small changes make a clear difference. Try these one at a time and keep the ones you like.

  • Turn off dialogue or voice enhancement, which can make vocals sound thin.
  • Turn off virtual surround for a cleaner stereo image.
  • Set night mode or volume leveling to off, so quiet and loud parts stay natural.
  • Lower the subwoofer level a step if bass sounds boomy.
  • Keep the turntable on a different shelf from the soundbar and subwoofer.

Placement Tips

Place the soundbar at about ear height when you sit, centered on your seat if you can. Keep it clear of cabinet edges, which can make sound muffled.

Keep the turntable a few feet away so the soundbar's bass does not shake the stylus.

Connection Options by Soundbar Input

Match your soundbar's ports to a method.

Soundbar input What you need Notes
AUX or RCA Turntable on LINE or a phono preamp Simplest and most reliable
Optical only Preamp with optical out or a converter No direct analog path
Bluetooth Bluetooth turntable Tidy, small delay
HDMI ARC only Route through a TV that passes audio Check TV support first

Is a Soundbar Good for Vinyl?

A soundbar is a convenient way to start listening to records, especially in a living room with no space for speakers. Many sound clear and full for casual listening.

For the best stereo sound, separate bookshelf speakers placed apart usually give a wider, more natural image than a single bar. If vinyl becomes a big part of your listening, that is a common next step.

Gear That Makes the Connection Easy

A Bluetooth turntable, a phono preamp and a soundbar with an analog input cover most setups.

Audio-Technica AT-LP60XBT

Audio-Technica AT-LP60XBT

Mentioned

Who Should Buy It

  • Beginners who want a plug-and-play vinyl setup
  • Desktop users needing compact powered monitors with balanced inputs
  • Listeners who value automatic tonearm operation and Bluetooth streaming
  • Those building a small room system with future upgrade potential

Skip It If

  • You require a remote control for volume and track selection
  • You have limited space without checking exact dimensions first
  • You already own a receiver and passive speakers that would be underused
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Pro-Ject Phono Box S3 B

Pro-Ject Phono Box S3 B

Mentioned

Who Should Buy It

  • Turntable owners wanting a dedicated, high-end phono preamp
  • Buyers with both MM and MC cartridges wanting loading flexibility
  • Audiophiles with a balanced-input amplifier downstream
  • Listeners wanting European handmade build quality

Skip It If

  • You want an all-in-one receiver with built-in phono
  • You do not have a balanced-input amplifier to take advantage of the balanced output
  • You want a stated weight or dimensions before buying
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: November 2026

Bose TV Speaker

Bose TV Speaker

Mentioned

Who Should Buy It

  • Buyers replacing thin TV speakers with a compact, easy bar
  • People who prioritize vocal clarity for news, sports, and dramas
  • Anyone who wants Bluetooth music streaming without a smart speaker
  • Those who may add a Bose Bass Module later for more low end

Skip It If

  • You need Dolby Atmos or DTS:X for movies
  • You want a wireless subwoofer included
  • You expect app control, room correction, or voice assistants
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Keep Reading

Related guides and picks on Mandrillis:

FAQs

Only if the turntable has a built-in preamp set to LINE and the soundbar has an analog input. Otherwise you need a phono preamp or a converter.
Not directly, because turntables output an analog signal. Use a phono preamp with an optical output or a small analog-to-digital converter.
It works well for casual listening and keeps the setup tidy. A wired connection gives the most reliable sound with no dropouts.

About This Guide

M

Mandrillis Team

The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.

Read our full research methodology.