MANDRILLIS Better Gear. Better Sound.
Why Is My Subwoofer Making a Humming Noise? (8 Safe Fixes)

Guides

Why Is My Subwoofer Making a Humming Noise? (8 Safe Fixes)

A low, steady hum from a subwoofer is one of the most common home theater problems. It usually comes from a ground loop or a cable, not a broken sub. This guide explains how to find the cause with simple tests and walks through eight safe fixes in order.

Quick Answer

A subwoofer usually hums because of a ground loop, where the sub and your receiver are grounded through different outlets or a cable TV line. Plug everything into one power strip, try a different subwoofer cable, and disconnect the cable TV or antenna line to test. A ground loop isolator often fixes the rest.

M Mandrillis Team • Expert guides. Real advice. • Last updated: Nov 22, 2026 • 5 min read

How this guide was put together

This guide is based on manufacturer manuals, published specifications and widely used audio reference standards. Mandrillis does not run hands-on tests for these guides, so treat figures as typical values and check the manual for your own gear before changing settings.

What Subwoofer Hum Sounds Like

Subwoofer hum is a low, steady drone, often at 60 Hz in North America or 50 Hz in many other countries. It is there even when nothing is playing and does not change with the volume knob much.

That steady tone is a clue. It usually points to an electrical issue in the connection, not a problem with the music or the speaker cone.

  • Steady low hum with no music: likely a ground loop.
  • Buzz that changes when you move the cable: a bad cable or connection.
  • Hum only when the TV is on: cable TV or antenna ground loop.
  • Rattle or distortion with music: a different problem, often placement or a damaged driver.

What a Ground Loop Is

Every powered device connects to ground through its outlet. When the subwoofer and the receiver plug into outlets on different circuits, they can sit at slightly different ground levels.

Your subwoofer cable then links those two grounds, and a small current flows through the audio shield. The sub amplifies it into a hum.

Hum Causes and Fixes at a Glance

Match what you notice to the most likely cause.

What you notice Likely cause First fix
Hum stops when sub cable is unplugged Ground loop Plug all gear into one power strip
Hum stops when cable TV line is removed Cable TV ground loop Coax ground isolator
Buzz when cable is moved Damaged cable Replace the subwoofer cable
Hum only near power cords Interference Reroute the cable away from power
Hum even with nothing connected Sub amplifier fault Contact the maker or a repair shop

Step One: Find Where the Hum Comes From

A few quick unplug tests narrow it down. Turn the volume down before unplugging anything.

Test the Subwoofer on Its Own

Unplug the subwoofer's input cable at the sub, leaving only the power cord connected. If the hum stops, the problem is in the connection or a ground loop.

If the hum continues with nothing plugged into the input, the sub's own amplifier may be faulty.

Test the Cable TV or Antenna Line

Unplug the coaxial cable TV or antenna line from your TV or cable box. If the hum stops, the cable line is creating the ground loop.

This is one of the most common causes in home theater setups.

8 Safe Fixes for Subwoofer Hum

Start with the free fixes. Most hum is solved within the first three.

1. Plug Everything Into One Power Strip

Plug the subwoofer, receiver and TV into the same power strip or the same wall outlet. This keeps their grounds at the same level.

Use a quality surge protector rated for the total load.

2. Replace the Subwoofer Cable

A cheap or damaged RCA cable can pick up noise. Swap in a well shielded subwoofer cable and test again.

3. Route the Cable Away From Power Cords

Running the sub cable alongside power cords can add hum. Move it away, and cross power cords at right angles if they must meet.

4. Add a Coaxial Ground Isolator

If the cable TV line causes the hum, a small coax ground isolator between the wall and the cable box breaks the loop. It is a common, safe fix.

5. Use a Ground Loop Isolator on the Audio Line

An RCA ground loop isolator sits on the subwoofer cable and blocks the loop. It can slightly reduce the deepest bass on some models, so test the sound after fitting it.

6. Check the Subwoofer Gain Setting

A sub gain knob turned near maximum amplifies any small noise. Set the sub gain around the middle and use the receiver's level control for fine tuning.

7. Turn Off Auto Standby to Test

Some subs hum briefly when their auto-on circuit wakes up. Switch the sub to always on to see if the hum is linked to standby.

8. Contact the Maker or a Repair Shop

If the sub hums with nothing connected to its input, the amplifier inside may be faulty. Check the warranty and contact the maker.

A Safety Warning: Never Remove the Ground

Some old tips suggest using a three-prong to two-prong adapter, often called a cheater plug, to stop hum. This removes the safety ground and creates a real risk of electric shock.

Do not do this. Use a power strip, a ground loop isolator or a coax isolator instead. They fix the hum without making your system unsafe.

Wireless Subwoofers and Hum

Wireless subwoofers do not use a cable to the receiver, so they rarely suffer from audio ground loops. Hum on a wireless sub usually points to interference, a pairing issue or the sub's own power supply.

Move the sub away from routers and other wireless gear, and re-pair it following the maker's steps.

Hum vs Other Subwoofer Noises

Not every subwoofer noise is hum. Telling them apart saves time, because each has a different fix.

Listen with the music off first, then with a quiet bass track playing.

  • Steady drone with nothing playing: ground loop hum.
  • Buzzing or rattling only on bass notes: something loose nearby, or a damaged driver.
  • Chuffing or puffing sounds: port noise from very loud bass.
  • Clicks when the sub turns on or off: normal auto standby relays.
  • Distortion at high volume: gain too high or the sub working past its limits.

The Bottom Line

Most subwoofer hum comes from a ground loop or a cable, not a broken sub. Plug all gear into one power strip, check the cable TV line and swap the sub cable first.

Use isolators for stubborn cases, and never remove the safety ground. If the sub hums with nothing connected, contact the maker.

Subwoofers From Our Reviews

Popular powered subwoofers for home theater and stereo setups.

Klipsch R-120SW

Klipsch R-120SW

Mentioned

Who Should Buy It

  • Movie fans adding a subwoofer to a surround system
  • Music listeners who like electronic, hip hop, or action soundtracks
  • Owners of small to medium rooms who can place a rear ported sub
  • Buyers who want the Klipsch spun-copper woofer look

Skip It If

  • You need a subwoofer with known physical dimensions before buying
  • You want wireless streaming from a phone
  • You prefer a sealed cabinet for tighter transients
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Kanto SUB8VMB

Kanto SUB8VMB

Mentioned

Who Should Buy It

  • Desktop audio users with limited floor space
  • Kanto speaker owners wanting a matching matte black finish
  • Apartment dwellers seeking controlled low end without a large cabinet
  • Listeners who prefer an analog wired subwoofer with simple controls

Skip It If

  • You need maximum low frequency extension for home theater
  • You want wireless streaming or app control
  • You require full published specifications including RMS and input panel details
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Klipsch R-100SW 10"

Klipsch R-100SW 10"

Mentioned

Who Should Buy It

  • Someone building a first home theater or music setup with an AV receiver
  • Apartment dwellers who need compact bass without huge output
  • Buyers who prefer a simple wired subwoofer with basic controls
  • Fans of the Klipsch copper woofer look who want a budget match

Skip It If

  • You need to connect to an older stereo receiver with only speaker posts
  • You want app control, room correction, or wireless connectivity
  • You need very deep bass below 30Hz for a large open room
Check Price on Amazon

We may earn a commission at no extra cost to you.

Last verified: October 2026

Keep Reading

Related guides and picks on Mandrillis:

FAQs

It is usually a ground loop between the sub and the receiver. Plug them into the same power strip and test again.
Yes, the coaxial line often creates a ground loop. A coax ground isolator between the wall and the box usually fixes it.
No, removing the ground creates a shock risk. Use a power strip or a ground loop isolator instead.

About This Guide

M

Mandrillis Team

The Mandrillis editorial team researches and compares audio and music gear using manufacturer documentation, verified specs and real buyer feedback, so you can make a confident purchase without wading through marketing claims.

Read our full research methodology.